design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ hd ? eee-29 ? 330 hd j capacitance ( f) rated voltage mark series identification mark for lead-free products black dot (square) lot number negative polarity marking (? a 0.2 w () reference size l d 0.5 h b 0.2 (i) k (p) (i) + 0.3 max. pressure relief ( 10 and larger) features endurance: 105 c 5000 h vibration- proof product is available upon request. ( 8 mm and larger) rohs directiv e compliant surface mo unt type series: hd type: v t 6.3v to 35 v : high temperature lead-free re? ow (suf? x:a ? ) y 50v to 100v : standard lead-free re? ow speci? cations di men sions in mm (not to scale) marking example: 6. 3 v 330 f marking colo r: black category temp. range 40 c to +10 5 c rated w.v. range 6.3 v.dc to 10 0 v.dc nomi nal cap. range 0.47 f to 1000 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 ( a) after 2 minutes (whichever is greater) tan please see the attached high temperature lead-fre e re ow products list. characteristics at low te mperature w.v. (v) 6.3 10 16 25 35 50 63 100 (impedance ratio at 120 hz) z( 25 c)/z(+2 0 c) 3 3 2 22222 z( 40 c)/z(+2 0 c) 4 4 3 33333 endurance after applying rated workin g voltage for 5000 hours at +105 c 2 c and then being stabilized at +20 c, ca pacitors shall meet the following limits. capacitance change ?0 % of initial measured value tan < 300 % of initial speci ed value dc leakag e current < initial speci ed value shelf life after storag e for 1000 hours at +105 c 2 c with no voltage applied and then being stabilized at +20 c, ca pacitors shall meet the limits speci ed in endurance. (with voltage treatment) capacitance change ?0 % of initial measured value tan < 200 % of initial speci ed value dc leakag e current < initial speci ed value resistance to soldering heat after re ow soldering and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change ?0 % of initial measured value tan < initial speci ed value dc leakag e current < initial speci ed value size code dl a, b h i w p k b 4.0 5.8?.3 4.3 5.5 max. 1.8 0.65?.1 1.0 0.35 - 0.20 c 5.0 5.8?.3 5.3 6.5 max. 2.2 0.65?.1 1.5 0.35 - 0.20 d 6.3 5.8?.3 6.6 7.8 max. 2.6 0.65?.1 1.8 0.35 - 0.20 d8 6.3 7.7?.3 6.6 7.8 max. 2.6 0.65?.1 1.8 0.35 - 0.20 e 8.0 6.2?.3 8.3 9.5 max. 3.4 0.65?.1 2.2 0.35 - 0.20 f 8.0 10.2?.3 8.3 10.0 max. 3.4 0.90?.2 3.1 0.70?.20 g 10.0 10.2?.3 10.3 12.0 max. 3.5 0.90?.2 4.6 0.70?.20 + 0.15 + 0.15 + 0.15 + 0.15 + 0.15 frequency (hz) 50, 60 120 1 k 10 k to correction factor 0.70 1.00 1.30 1.70 frequency correction factor for ripple current j 6.3 v a 10 v c 16 v e 25 v v 35 v rated volt age mark h 50 v j 63 v 2a 100 v (unit : mm) 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ hd ? eee-30 ? w.v. cap. ( 20 %) case size speci cation part no. (rohs:compliant) re ow min. packaging q'ty dia. length size code ripple current (120 hz) (+105 c) impedance (100 khz) (+20 c) tan (120 hz) (+20 c) taping (v) (?) ( mm) (mm) (ma r .m.s.) (pcs) 50 0.47 4.0 5.8 b 5 12.0 0.12 eeehd1hr47r (1) 2 000 1 4.0 5.8 b 7 12.0 0.12 eeehd1h1r0r (1) 2 000 2.2 4.0 5.8 b 12 12.0 0.12 eeehd1h 2r2r (1) 2 000 3.3 4.0 5.8 b 16 12.0 0.12 eeehd1h 3r3r (1) 2 000 4.7 5.0 5.8 c 21 7.2 0.12 eeehd1h4r7r (1) 1 000 10 6.3 5.8 d334.0 0.12 eeehd1h100p (1) 1 000 22 8.0 6.2 e502.0 0.14 eeehd1h220p (2) 1 000 33 8.0 10.2 f 74 1.5 0.14 eeehd1h330p (2) 500 47 1 0.0 10.2 g 94 0.8 0.14 eeehd1h470p (2) 500 100 10.0 10.2 g 94 0.8 0.14 eeehd1h101p (2) 500 63 10 8.0 6.2 e452.0 0.18 eeehd1j100p (2) 1 000 22 8.0 10.2 f 65 1.5 0.18 eeehd1j220p (2) 500 33 1 0.0 10.2 g 80 0.8 0.18 eeehd1j330p (2) 500 100 3.3 8.0 6.2 e 30 2.0 0.18 eeehd2a3r3p (2) 1 000 4.7 8.0 10.2 f 50 1.5 0.18 eeehd2a4r7p (2) 500 10 8.0 10.2 f 55 1.5 0.18 eeehd2a100p (2) 500 22 1 0.0 10.2 g 70 0.8 0.18 eeehd2a220p (2) 500 w.v. cap. ( 20 %) case size speci cation part no. (rohs:compliant) re ow min. packaging q'ty dia. length size code ripple current (120 hz) (+105 c) impedance (100 khz) (+20 c) tan (120 hz) (+20 c) taping (v) (?) ( mm) (mm) (ma r .m.s.) (pcs) 6.3 330 8.0 10.2 f 230 1.5 0.30 eeehd0j331ap (7) 500 1 000 10.0 10.2 g3130.80.50 eeehd0j102ap (7) 500 10 100 8.0 6.2 e622.0 0.30 EEEHD1A101AP (7) 1 000 220 8.0 10.2 f 160 1.5 0.30 eeehd1a221ap (7) 500 330 1 0.0 10.2 g 238 0.8 0.30 eeehd1a331ap (7) 500 16 10 4.0 5.8 b 28 12.0 0.20 eeehd1c100ar (5) 2 000 22 5.0 5.8 c 39 7.2 0.20 eeehd1c220ar (5) 1 000 47 6.3 5.8 d704.0 0.20 eeehd1c470ap (5) 1 000 100 8.0 10.2 f 130 1.5 0.20 eeehd1c101ap (7) 500 220 1 0.0 10.2 g 220 0.8 0.20 eeehd1c221ap (7) 500 470 1 0.0 10.2 g 340 0.8 0.20 eeehd1c471ap (7) 500 25 4.7 4.0 5.8 b 17 12.0 0.16 eeehd1e4r7ar (5) 2 000 10 5.0 5.8 c 28 7.2 0.16 eeehd1e100ar (5) 1 000 22 6.3 5.8 d554.0 0.16 eeehd1e220ap (5) 1 000 33 6.3 5.8 d554.0 0.16 eeehd1e330ap (5) 1 000 47 8.0 6.2 e562.0 0.18 eeehd1e470ap (7) 1 000 100 8.0 10.2 f 130 1.5 0.16 eeehd1e101ap (7) 500 330 1 0.0 10.2 g 238 0.8 0.16 eeehd1e331ap (7) 500 35 4.7 4.0 5.8 b 17 12.0 0.13 eeehd1v4r7ar (5) 2 000 10 5.0 5.8 c 28 7.2 0.13 eeehd1v100ar (5) 1 000 22 6.3 5.8 d554.0 0.13 eeehd1v220ap (5) 1 000 33 8.0 6.2 e 5 32.0 0.16 eeehd1v330ap (7) 1 000 6.3 7.7 d8 57 2.0 0.13 eeehdv330xap (5) 900 47 6.3 7.7 d8 57 2.0 0.14 eeehdv470xap (5) 900 8.0 10.2 f 79 1.5 0.14 eeehd1v470ap (7) 500 100 10.0 10.2 g 101 0.8 0.14 eeehd1v101ap (7) 500 220 1 0.0 10.2 g 220 0.8 0.14 eeehd1v221ap (7) 500 standard lead-free re? ow products(50v to 100v) if part number exceeds 12 digits, voltage code is abbreviated as follows; 0j j, 1a a, 1c c, 1e e, 1v v ?please refer to the page of ?e? ow pro? le?and ?he taping dimensions? ?when requesting vibration-proof product, please put the last ??instead to ? endurance : 105 ? 5000 h high temperature lead-free re? ow products(6.3v to 35v) endurance : 105 ? 5000 h 00 nov. 2012
|